B-Brand P3 Mask Valved (5 Masks/Box)

Typical Application

Ideal for protection against demolition, groundwork, low level asbestos, scabbling, shot creting, molyen metal handling, maching, grinding, polishing, linishing, stainless steel, MIG/TIG, spot welding, brazing/silver solder, galvanised welding, rust, filler dust, concrete & plaster, wood (soft & hard), plastic dust, paint dust, boiler maintenance

Description

• Unique "Big Eye" design provides very low breathing resistance due to the increased filtration area
• Polypropylene (P.P) outer layer provides smooth lining and avoids loose fibres
• Embossed fringe seal avoids fluffy open layers around the edges
• Adjustable head strap ensures the best facial seal with minimum leakage
• Contour design ensures the compatibility of glasses/goggles reducing fogging
• Full facial close-cell foam and adjustable nose piece ensures increased worker comfort and acceptance
• Protection level FFP3 with exhalation valve

Technical Details

Conforms to EN149:2001 + A1:2009 FFP3 NR

Packaging Options

5 Masks - Box
12 Boxes - Carton

Storage

Storage or warehouse areas must have a normal climate, i.e. the air must be dry, cool and free from hazardous substances. In addition, the masks must be protected against light and heat radiation.

Unpacked or damaged masks may no longer be used. The storage period, under these conditions, is limited to 5 years.

Limits Of Use

The mask must be replaced after a maximum of 8 hours use or if, due to the effect of dust penetration, breathing resistance becomes too considerable, or immediately leave the work area if:

• Breathing becomes difficult
• A feeling of dizziness or other imitation occurs
• The masks are damaged
• An emergency occurs